Cement & Concrete Testing Equipments

We are leading trader, wholesaler and service provider of Survey Instrument, Cement Lab Equipment and Safety Equipment. The whole range is demanded for sturdy construction, less maintenance, optimum performance and longer functional life.

Compression Testing Machine - Hydraulic 200 Tons Capacity, Electrical Cum Hand Operated, Channel Type Singal Gauge with 20 cm Diameter Pressure Gauge. Suitable Operation on 415 Volts Three Phase A.C. Supply. With company own Calibration Certificate Valid for Six Months.

Range from 1,15,100/- to 1,60,550/-

Compression Testing Machine Make: Vertex - Hydraulic 100 Tones Capacity, Hand Operated, Channel Type with company, own Calibration Certificate Valid for Six Month.

Range from 44,250/-  to 50,250/-

Marshall Stability Test Apparatus (Premium Model): Make: VERTEX, Most frequently used test by highway departments, contractors, engineers, testing laboratories and governmental agencies is the stability test using Marshall Apparatus. The test is intended for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface. For use with hot mixture containing asphalt or tar and Aggregate up to 25.4 mm maximum size.
Salient Feature: Motorised Single Phase 220-230Volt, L&T Indicator & Regulator, Model for 4” Dia Sample, With Accessories: Marshall Stability Machine:1Nos, Compaction Pedal with Mould Holder:1Nos, Compaction Rammer: 4.5kg Weight & free, Fall 45.7cm: 2Nos., Braking Head Assembly: 1Nos, Marshall Mould 100mm with base plate & Extension Collar., Integrated Proving Ring 50kN: 1Nos, Dial Gauge 0.01 x25mm:1 Nos, Dial Gauge 0.002 x 5mm: 1Nos.

A)  Max. Capacity (KN)-1000 KN. B)  Min. Graduation - 0-1000. C)  Clearance for Tensile at fully descended Working piston (mm) - 50-800. D) Clearance for Compression Test (mm) -0-800,E)  Clearance between columns (mm) -0-600,F)  Ram Stroke (mm) - 250, G)  Power Supply - 3 Phase, 440 volts, 50 cycles, A.C. , H)  Straining speed at no load (mm./min.) - 0-100, I)  Oil pump - Radial plunger pump, J)  Output of pump at 210 Kg. /cm2 lit./min. - 3.6, K)  H.P. of Motor for pump - 2, L)  H.P. of Motor for middle beam - 0.5, M) Rapid adjustment of middle beam (mm/min.) - 400, N) Overall dimensions of Machine (mm) (LXWXH) - 2200X800X2400, O) Approximate. Weight (Kg.)-3200.

Used to determine the Elongation Index of the Aggregate. Aggregate particles are considered elongated when their length is more than 1.8 of the nominal size. Consists of a hard wood base with vertically mounted metal studs as Specified in the IS 2386 (Part-1) & BS 812.

Capacity from 140kg. to  200 kg. The apparatus shall consist of two parallel self aligning semi- cylindrical steel bearers with the bearing surface rounded to 40mm dia. The loading device consists of a bucket connected either directly or through levers to the loading arms. The loading shall be at uniform rate 45 to 55 kg/minute by allowing lead shaft to flow into the bucket. Provision shall be made to arrest the flow of lead shots immediately the tile breaks. Lead shots-20 Kg.

Consists of M.S. Cylindrical container 150mm plus minus 0.5mm dia x 130mm to 140mm high with base plate 200 to 230mm/sqr x 6 mm thick. A plunger of 148mm plus minus 0.5mm dia x 100 to 115 mm high Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded.

• High stability.
• Self-aligning platen assembly.
• Load Gauges are calibrated in kN against certified Proving Rings, traceable to NPL / NCCBM.
• Suitable for testing cubes and cylinders of various sizes.
• Using special platens, bricks can also be tested.
• Logged data printing facility through a parallel port interface available in digital and microcontroller based versions.
• Calibration process accredited by NABL (National Accreditation Board for Laboratories).
• Machines with CE mark also available, on special request.
• Operator’s safety features like a metal door with a perspex window and overload tripping device are provided in all models.
• Longevity
• Industry proven designs

Other Information :

• Application: Compressive Strength Measurement

The Thickness Gauge (Flakiness Index) meets BS-812 specifications and features seven slots for rapid hand trying of particles from each of the seven sieve fractions from 2.5 to 0.25in (63 to 6.3mm). The mass of all flaky particles as a percent of the whole sample is the flakiness index.

• Delivery Time: 2 Day

As per IS: 516. Mould Cast Iron. Size: 150 x 150x 150 mm with ISI Certification. These are used for casting cement concrete test specimens for carrying out compressive strength tests.

Bowl for collecting sample.

Rate Start from : 1250.00 to 7,20.00 as per Make & Size.

Top Dia-100mm, Bottom Dia-200mm, Ht-300mm, Sheet Thickness-1.6mm min., As per IS: 7320, BS 1881.  It is used for the determination of the consistency of fresh mixed concrete where the maximum size of the aggregate does not exceed 38mm.

• Delivery Time: 2 Days

A muffle furnace (sometimes retort furnace in historical usage) is a furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash.

Make: Precise Applicable gas: OxygenMeasuring Range: 0~25% VOLResolution: 0.1ºsic Error: + 2% (FS)Recovery time: <15SAlarm: Sound, light and Vibration alarmWeight: 150gSize: 120 * 65 * 25mm

100 mm x 100mm x 500mm Specimens.

• Delivery Time: 8 days

70.6 x 70.6 x 70.6 mm.as per IS Specification , Made of Cast Iron with base plate.